ABS Robusta WTS 300
Product ID | 00200027 |
Brand | ABS |
Voltage | 1x230V |
Diameter in mm | 157 |
Height in mm | 324 |
Maximum head in mwc | 8 |
Maximum fluid temperature in °C | 40 |
Minimum fluid temperature in °C | 1 |
Capacity in m3/h at 4 bar | 5 |
Article number factory | 01135068 |
Type / Model | Robusta |
Connection in inch | 1¼ |
Cable length in meters | 10 |
Power in Kw | 0,50 |
Geleverd met vlotter | Ja |
Breedte in mm | 195 |
Lengte in mm | 195 |
The Plug-in, light drainage pump of ABS is extremely suitable for pumping slightly contaminated water with particles of maximum 10 mm in size.
The pumps are designed for fixed or flexible installation for intern as well as extern use such as draining basements, wells, tanks and pools. The built-in float switch and check valve in the discharge connection prevent water from refluxing when it is drained. When the suction ring is removed, the pump can drain water op till 3 mm height.
The pump case is made of plastic. The shaft is made of stainless steel with Nylon impeller and NBR seals.
The pumps are designed for fixed or flexible installation for intern as well as extern use such as draining basements, wells, tanks and pools. The built-in float switch and check valve in the discharge connection prevent water from refluxing when it is drained. When the suction ring is removed, the pump can drain water op till 3 mm height.
The pump case is made of plastic. The shaft is made of stainless steel with Nylon impeller and NBR seals.
PDF download:
click here for comprehensive technical data
Stock | 0 pieces |