Jung sewage lifting station Compli 510/4 BW

Product ID 03000039
Brand Pentair
Voltage 3x400V
Frequency 50 Hz
Maximum head in mwc 16
Article number factory JP09191
Max particle passage size in mm 70
Connection DN 80
Type / Model Compli 500
Material pump part Gietijzer
Cable length in meters 4
Power in Kw 1,00
Materiaal waaier Kunststof
Waaier type Vortex
Jung Compli 510/4 BW
Sewage lifting station
Motor: 1,0kW 3x400V 50Hz
Capacity: 13-52m³/h @ 6-1mWk
Free passage: 70mm
Connection: DN80
Including: 4 meter cable

With its performance graduations, the compli 500 lifting station has been designed for use in detached houses with increased domestic waste-water inlet and for a larger storage capacity. During the design work, special attention was given to easy handling (weight !), space-saving erection and uncomplicated installation.

The submersible unit is permitted for general use in areas subject to flooding. The control unit has to be fitted in a well ventilated flood-proof room.

The PE tanks has freely accessible drains, a cleaning opening at the top and a clamp-type inlet flange for an easy installation.

The inlet height can be variegated according to the feeding pipe:
• DN 100: 180-205 mm (left), 250-300 mm
(center) and 290-340 mm (right), each
continuously adjustable
• DN 150/DN 50: 180 mm (left), 275 mm
(center) and 315 mm (right)

For the connection of a DN 100 feeding pipe a reducer DN 150/100 is enclosed. The tank has vertical inlet in DN 150 or DN 100. If not in use, the rear inlet must be closed with the plug set DN 150 (accessory). The vortex impeller of the pump offers the safety you can rely on.

Keywords: Jung, compli, opvoerinstallatie, JP09191, pentair
Stock 0 pieces